GE Healthcare - Definium 5000
by GE Healthcare

GE Healthcare Definium 5000 Forums

Updated  Sep 19 2020
2 Replies

GE Healthcare - Definium 5000

Communication error between the magic pc and the definium 5000 generator any idea... Any help?? 

RE: GE Healthcare - Definium 5000

Dilson Mendoza  replied 8 days ago

Updated  Apr 23 2020
1 Reply

GE Healthcare - Definium 5000
I need restore system. I have login service "insite" but I need password to restore calibration data

RE: GE Healthcare - Definium 5000

Chuck T. replied 5 months ago

Updated  Sep 19 2020
1 Reply

GE Healthcare - Definium 5000
Hello colleagues, Im having trouble with a Definium 5000 equipment The Magic PC takes some time to start applications, then In the message log it says "timeout error" could not commuticate with generator. The error log says: ERR 3600024-Jedu poweruo failure ERR 5000011-System boot Failed: Timed out waiting for boot to complete ERR 5800010-User timeout on boot When booting up before the Application starts it says something like a missing file: Starting magicroutes: ls: /etc/rc.d/rc5.d/S70IIroutes: No such file or directory [FAILED] I already reinstalled all the OS and Applications and keeps doing the same I hope someone can help me Regards

RE: GE Healthcare - Definium 5000

Dilson Mendoza  replied 8 days ago

Added  Jan 19 2019
0 Replies

GE Healthcare - Definium 5000
Hello everyone. Can anyone help with the following fault i have on the AMX 700. The equipment does not work or does not detect the flat panel detector. The LCD shows the following message: film mode only

RE: GE Healthcare - Definium 5000

RandalMed posted 2 years ago

2 Replies

GE Healthcare - Definium 5000
Hello, I am getting the following error on my Definium 5000: "Exposure stopped. Release exposure switch and try again. Call service if problem persists." This has been occurring intermittently starting in the early afternoon for the past 16 days. At times, turning off the equipment for 1-2 hours will resolve the problem temporarily and for an entire week the error did not appear but it did return the week after. While investigating, the following error codes appeared in the log leading up to this problem: 20049, 20012 and 1600140. Has anyone seen this? Please let me know what you think. Thanks!

RE: GE Healthcare - Definium 5000

DEF500 User replied 3 years ago

1 Reply

GE Healthcare - Definium 5000
Is there a way for you to put in multiple x ray exams for the same patient without having to re-input all of the same patient info again like patient name, DOB, medical record number, etc..

RE: GE Healthcare - Definium 5000

DEF500 User replied 3 years ago

Updated  Jun 2 2017
2 Replies

GE Healthcare - Definium 5000
Hello, I am getting the following error on my Definium 5000: "1201006  Detector Power Good signal status is bad. Power Supply Problem. Reset system and call service if problem persists". Has anyone seen this? I do not have a breakdown of these specific errors that you can find in the error log in service mode. Let me know what you think. Thanks!

RE: GE Healthcare - Definium 5000

jimsdavis replied 3 years ago

Updated  Jul 11 2016
3 Replies

GE Healthcare - Definium 5000

INTERMITTANTLY,AFTER AN EXPOSURE,THE DIFF 5000 WILL BEEP APPROX.4 TIMES WITHOUT ANY ERROR MESSAGES.ANY CLUES ??

RE: GE Healthcare - Definium 5000

Tim19506 replied 4 years ago

Added  Nov 8 2014
0 Replies

GE Healthcare - Definium 5000

I work in a federal prison and they are getting ready to install one of these machines. The table seems fine for many exams, but how can you do full table exams (KUB,L & T Spines, hips, femurs...) with this system?

RE: GE Healthcare - Definium 5000

mkyle posted 6 years ago

0 Replies

GE Healthcare - Definium 5000

This product is dysfunctional for a patient lying on the table to take abdomen decub x-ray, because proximity sensor beam will be interupted by a patient.

RE: GE Healthcare - Definium 5000

DV posted 6 years ago

Start a Thread

Equipment Name: GE Healthcare - Definium 5000
SIGN IN FIRST
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree