I successfully configured a DICOM printer on GE AMX 700 DR but it failed to print.
I discovered that the Network signal was x.
I need to move to its windows desktop to confirm the machine IP address but I was unable to switch to its desktop. RE: GE HealthCare - Definium AMX 700
Hello friends, Can anyone help me to get the "Service Manual for GE Definium AMX 7000 Mobile Xray Machine"
also, what exactly does error 320 stands for? thanks in advance, my email is olatem2002@yahoo.comRE: GE HealthCare - Definium AMX 700
Hello everyone. Can anyone help with the following fault i have on the AMX 700. The machine will only drive at half speed!!!!
I have checked the park sensor its fine. Ive changed the drive amplifier and drive control with no success. I've traced the 24v output you get when the tube is in the park position and that appears to be fine. Ive also tried calibrating the drive handle. Thanks RE: GE HealthCare - Definium AMX 700
When you set date and time, next day or two later it reverts back to a default date. I suspect a clock battery in the computer and I need to know what type of battery is used.
This equipment was stored for 2 years before I opened it last month, When I turned it on, it has some battery, the software began running, but when it was almost finish, it turn it off. I already changed the batteries for new ones , all 9 of them, but still has the same problem. The battery indicator doesn't show up any led and the panel shows that the equipment needs to be charged, first recommended and then immediately.
I have a problem with a AMX 700, This equipment was stored for 2 years, when I opened it it has some battery left, but didn't charged. I already changed the batteries, 9 brand new Panasonic original batteries, and the panel still shows that the equipment needs to be charged and don't let me go into the program, as soon as the software finish running, the system turns it off. This machine came from Europe, how can I check if it still have the 220 v input or they changed it to 120 v.
