Hi every one I am facing some troubles about how to connect HP laser jet pro M102a printer with machine any body help me how to add the driver in machine to connect printer for reports. I have printer driver CD but I am unable how to connect or install the driver.
Hi, I am working on an S8 and cannot get the left and right buttons (next to the trackball) to work consistently. I've tried replacing the main board and elastomer with brand new parts, same issue. i have tried using a new elastomer with the original board and vice versa, same issue. I've cleaned the contacts on the main board and the elastomers, same issue. I even added conductive dots to the board and they are still intermittently working when the buttons are pressed. Any info you can provide would be awesome.
How do I setup volume measurement in order to do it both ways: start the measurement when pressing volume or take 3 calliper distances and press volume in the end?
The last one is not working for me.
THANKS. RE: GE HealthCare - Logiq S8
I have a logiq S8 that is having intermittent artifacts all over the scanning screen. Ran diagnostics for the noise flor and BF in low, med and high. Failed the noise test, channels 191 failed on low, med and high. I replaced the BF board(it wasn't cheap), a month later the issue comes back, it didn't fail the noise floor test but it did fail the same channels as before, plus channels 195 and 196 on the BF med test. Replaced the PID board and now we are seeing the same issue, has anyone seen this before? RE: GE HealthCare - Logiq S8
Hi, i am trying to connect a pencil cw-probe that i bought to my s8. The slot is blocked. I already did a system update with the cw key but i cannot physically connect. I suspect the board is not able to receive cw and i have to buy a new piece of hardware, something like a port. Do i have to buy a new main board or do you know of the existance of such a connector port for CW?
Thank you in advance RE: GE HealthCare - Logiq S8
