Heraeus - Megafuge 1.0R
Heraeus Megafuge 1.0R Forums
Add Centrifuge to My Bench12 Results
Updated Jun 28 2022
3 RepliesHello, my lab has a Heraeus Megafuge 1.0R that we need to move to a new building. Should I try to remove the rotor before moving? If so, where can I find instructions to do so? I downloaded the User Manual, but instructions for Rotor Exchange are missing. Thanks RE: Heraeus - Megafuge 1.0R
Updated Jun 14 2022
4 RepliesHello, I have a Megafuge 1.0 that opens and closes perfectly when it is on standby. When you start the cycle, "LID" appears on the screen and remains blocked. The closure system is tested and correct. Any suggestion? Thanks. RE: Heraeus - Megafuge 1.0R
Added Mar 28 2022
0 RepliesHello! Help with the Megafuge 1.0 R centrifuge, it gives an error E003, I started to figure it out. Two power transistors, four optocouplers, resistors, a zener diode burned out. How would I find everything, but only one. I did not find IXGH10N60A transistors and installed other IXGH50N60A. Still won't launch. The engine was tested for breakdown. And the 74HC14d chip also burned out, there is no Q1 transistor on the board, help me figure it out or a circuit for this centrifuge? (witemonah@mail.ru) RE: Heraeus - Megafuge 1.0R
Updated Mar 28 2022
2 Replies4@02AB2C9B5! >9 Megafuge 1.0 R, 2K40QB >H81:C E003, =0G5; @0718@0BLAO. !3>@5;8 420 A8;>2KE B@0=78AB>@0, G5BK@5 >?B>?0@K, @578AB>@K, AB018;8B@>=. 0: 1K 2AQ =0HQ;, => 548=AB25==>. 5 =0HQ; B@0=78AB>@K IXGH10N60A 8 CAB0=>28; 4@C385 IXGH50N60A. AQ @02=> =5 70?CA:05BAO. 2830B5;L =0 ?@>1>9 ?@>25@8; 8A?@02=K. 0 8 5IQ A3>@5;0 @0 Q1 =0 ?;0B5, ?>1@0BLAO 8;8 AE5 RE: Heraeus - Megafuge 1.0R
Updated Nov 15 2020
1 ReplyHi everybody. Does anyone know what is the cause of error code E-08 in Heraeus Megafuge 1.0R? E-08 error code is not specified/described in Service Manual. E-08 error code appear in the display early after centrifuge start spinning. Fails do not occur always but randomly (very frequent in recent times). What could I do to fix this issue? All suggestions are welcomed. Thanks in advance. RE: Heraeus - Megafuge 1.0R
Updated Oct 20 2020
Updated Jan 18 2019
2 RepliesCentrifuge turned off during use. There was not power failure in laboratory or any other related situation. Instrument remained turned off and not responsive.
Electrical connections were confirmed and it was restarted. But same behavior was repeated later.
Has this behaviour been observed previously for this equipment? Is there any additioal troubleshooting that let us correct these power disruptions?
Thanks in advance for your answers
Rosa De Jesus RE: Heraeus - Megafuge 1.0R
Updated Dec 12 2018
3 RepliesDoes anyone know of a suitable replacement for the two gas springs which hold the lid open? Thermo Scientific no longer supports this centrifuge. RE: Heraeus - Megafuge 1.0R
Updated Sep 8 2015
1 Reply
I am using aCentrifuge Heraeus Megafuge 1.0.
It stops and display E-15. what could i do to resolve the problem?
RE: Heraeus - Megafuge 1.0RAdded Nov 20 2014
0 Replies
Hi,
Baxter Heraeus Megafuge 1,0 It wouldn’t turn on. All lights are down even after I plug it out and in. We had to use emergency pull to open the lid.
any one know the reason please let me know.
thanks
MT
RE: Heraeus - Megafuge 1.0R