Good morning, can anyone help me with this equipment. I am in need of the complete service manual including the calibration software.
Can someone help me
I have a question regarding operating the OEC 9800/9900 C-arms. Is there a way to "Reset to Home" the image orientation using the control panel? We can rotate the image digitally CW or CCW using the control panel. But is there a way to reset to default (0 rotation) through the control panel or menus of the software? Resetting the C-arm resets the image orientation, but of course, we cannot do that in the middle of a case. RE: GE HealthCare - OEC 9800 Plus
hey, guys so, I change the battery of the CMOS and trying to set the the bios. systems boots up, I press delete to get to the CMOS settings, after that. I cant do anything, press every button nothing happens. I change different keyboards same thing happens. i can only press delete to get to the CMOS setting. Anybody know what my issues is? where to look to solve the issue? RE: GE HealthCare - OEC 9800 Plus
After replacing the 3 v battery for Bios and set up bios. Got system up but getting touch screen failure. Check all connections seems .OK RE: GE HealthCare - OEC 9800 Plus
Hi, Just wondering about "AD Channel 8 fail" error that occurs on bootup. I've done some digging and found that it is sensing a possible voltage in the HV tank on bootup. Has anyone found a solution? RE: GE HealthCare - OEC 9800 Plus
We have a 9800 Plus that takes great images, but when sent to PACs the image is very dark. The PACs Team says it is a window leveling issue. Of course, they say it must have to be a problem with the c-arm. Not sure I'm totally buying their assertion, but I guess I have to prove otherwise. My guess would be a faulty Image Processing Board. Anyone ever have a similar issue?
Thanks
Randy
RE: GE HealthCare - OEC 9800 Plus
Hello friends. I am having problems with an oec9800 machine. The begining was the Fluoro Function Board that stuck the boot up process remainig only squares in the display of C.Arm. When ia replece this board with another one of different machine it work fine. I purchase a new board but this one still stuck the boot process. Even the workstation is unable to finish loading sofware. I cant connect via RUT because the generator dont finish the boot process. I tryed to erase flash but it didnt work.
Somebody can help me? I work with this Carms since 2002 but with the models 9000, 9400 and 9600.
Thanks ! RE: GE HealthCare - OEC 9800 Plus
