GE HealthCare Corometrics 118 Forums

The display for my corometrics 118 has a lines and dot in its display. does it have a reset button or how do I go around this problem?

need to know replacement battery number and size

need one

Hi my name is Hoa

What value of the weight do you use to calibrate a GE Toco Transducer?

Do you have the calibration chart?   As I know  different value of weight will calibrate for different number reading on the fetal monitor.

Ex: I am using 116 monitor, what weight value do I need for calibration to get voltage range in 2 to 4, and gain for 30 to 45?

Thanks in advance

118 displays non volitile ram failure

If I replace the ram do I have to reload anything?

Hello,

I am wondering if page 8-2 & 8-3 of the service manual is available? I need to see the error table on page 8-2,

Thanks

need connection cord, 1 toco and 2 us transducers

I am an OBGYN working at mission hospital in rural Honduras.  I know nothing about the inner workings of the fetal monitor, so please bear with me.  We started the OB program 2 years ago and have one of the cheap all-in-one monitors that have a little 4 inch display.  It is pretty hard to read and useless for subtile changes in heart rate.  So, I am looking to see if I can find an older monitor that will give me video output to a video monitor.  I am under the impression that the newer models have proprietary software that will enable output to a video monitor, but this would be cost prohibitive for my hospital.  My question is there an older model that will give me the ability to hook up a simple flat screen monitor to have a visual of the fetal heart rate pattern without having to buy extra software?  I have worked with Philips, Corometrics, GE, and HP in the past and they seem to be very good machines.  I can get most anything on ebay, so if you have any information about a model that will work, please let me know.  

Anyone have a service manual, also looking for ECG cable

How do we change the printer BPM scale