found R186 burnt open . value stamp rendered undecipherable. any one know the resistance ?
i assume it to be a low value 'fused' resistor. still seeking a schematic (which would have this info ) RE: Megadyne - Mega Power
I really need an expert advice and assistance on how to get rid of the alarm that keeps coming on upon power on the Megadyne - Mega Power machine. The alarm is still coming on.
Thanks for your help in advance.
Regards RE: Megadyne - Mega Power
Hello,
I'm looking for the Megadyne Field Calibration software and calibration procedure to solve a Megadyne Mega Power error. Can you kindly provide this?
Best regards, RE: Megadyne - Mega Power
Hi I have an error 205 on a Mega Power ESU - Reviewed the service manual on this and have removed all switches from the unit and on power up I still receive the same error - No broken terminals in any of the connections or anything indicating a short from my perspective. Most all of the contacts provided like SOMA or Johnson and Johnson were unable to assist. Has anyone else ever dealt with this error on one of these ESUs before? RE: Megadyne - Mega Power
hello i have esu : megadyne - mega power, error code 208. Do you know the parts that are damaged?. I read in the manual service there is no explanation RE: Megadyne - Mega Power
The manual says VSV Error Voltage sense error at Power on Self test (POST).The fault is definitely on the main PCB I swapped it out.Can anyone maybe help with where the fault may lie as this is a common problem on many of my units,Im trying to trace the culprit or culprits.There is a multiturn pot on the PCB ,does anyone have calibration procedures ,none in my manual or any actual on board test point values ?Thanks.
Show less RE: Megadyne - Mega Power
