The orange service required light just started blinking on my TotalCare SpO2RT bed. I've only had this refurbished bed for less than one week, and my mother hasn't even laid on it yet. I know very little about the bed. Any ideas on what is going on with it? If I need to have it professional serviced, whom should I contact? I'm in the central Florida area (Ocala), between Gainesville and Orlando. Thank you.
I purchased a Hill-Rom Sp2rt for my husband, 4 years ago, when I brought him home during Covid from a nursing home. We just had our power go out & the back up battery failed. Is it easy to replace the battery or should I have a tech replace it. Also what battery should be used & if I should use a repair person/tech, can you recommend someone in the Tampa Bay Area? Thanks for your help.
hil rom sport2 p1900 total care mattress sinks in the middle . patient is 6 foot 5 inches weighs 220lbs. in the part where the bed inclines it sinks continually in the opti rest mode
I have a TotalCare SpO2RT that suddenly lot power. The power cable was then unplugged and reconnected. I checked that the power cable was connected to the PCB board and it was. I plugged the bed back in and I heard the clicking sounds but the bed did not receive power and the blower did not start. The bed is in a high position and I cannot get it to lower.
Hello! We purchased a refurbished TotalCare Sport P1900 2 years ago for my quadriplegic brother. Recently the seat and chest sections on the mattress have started deflating, after he’s in the bed for some time. The error codes being displayed have been various but the ones I have identified are
91-1-113 95-1-112
10-1-170. 94-1-112
After the bed deflates and we’ve unplugged it, upon restart there are times when the blower motor cannot be heard and an odd “ticking” noise can be heard when this happens. This doesn’t happen every time but we have noticed it at least a handful of times.
We are desperate to fix his mattress and any help would be greatly appreciated. I’m trying to determine if we need a new mattress or if the issue is somewhere in the electrical/air hoses.
Bought used. Initially is was difficult to get air mattress to initiate but with persistence something happened and it worked great for 1 day.
At the end of the first day it was unplugged. Day 2 powered up and it will not inflate whatsoever. Not on max inflate or the other option. It also will not turn or perform percussion which it absolutely did on day 1.
Any advice would be appreciated
