Leica Autostainer XL (ST5010) emits a continuous audible alarm sound, immediately after power up, and an exclamation mark (and a blinking cursor) is on the LCD screen. It does not react to any key presses. Has anyone seen this issue? I am guessing that it is the main PCB, but wondered if a failed battery-backed RAM with RTC clock chip could (DS1243Y+120) could be responsible.
Leica ST5010 Autostainer XL - power supply. Does anyone know the specs? Is this an off-the-shelf power supply? It looks, from pictures, as though it might be a PC computer power supply. RE: Leica Biosystems - ST5010 Autostainer XL
Leica ST5010 Autostainer XL - Load and Exit switches
Does anyone have a part number & supplier for a good replacement for the momentary switches used on the Load and Exit keypad boards?
Ross RE: Leica Biosystems - ST5010 Autostainer XL
The water on the wash cycles isn't raising fast enough. Does anyone know how to start the wash cycles during the stain or how to disable the water saving feature? RE: Leica Biosystems - ST5010 Autostainer XL
Hi - the auto stainer has a leak (a gush) from the bottom of the machine. It seems to be underneath the area where the wash stations are situated. Is there a valve issue or possible a corrosion issue. Thank you RE: Leica Biosystems - ST5010 Autostainer XL
I've got a customer whose has an issue with the display. Initially, the lower line on the display would intermittently blank out; later, the entire display started blanking out. The soft keys continued to function. Has anyone run into that situation? Is it most likely to be the LCD display itself? Has anyone found a source for the display?
Ross RE: Leica Biosystems - ST5010 Autostainer XL
