Fujinon EPX 2200 Forums

Me sale el error

Lámp changer failed en pantalla azul

Y lamp changer failed con vídeo

O vaces parece normal la como si estubiera todo bien pero queda como bloqueado no funciona ni teclado ni nada solo da vídeo

Y También en casos enciende normal  y todo trabaja bien

Me podrían ayudar con esta falla por favor

I get the error

Lamp changer failed on blue screen

And lamp changer failed with video

Or sometimes it seems normal as if everything is fine but it remains blocked, neither the keyboard nor anything works, it only gives video

And also in cases it turns on normally and everything works fine

Could you help me with this failure please

Hi everyone, my name is Gerardo a biomedical engineer, that it’s working medical equipment repair. does anyone have the service manual if the Fujinon system 2200 processor. I can pay for it just contact me my gamf1003@gmail.com my email. Thank you

I need some help with "Error Lamp Changer Fail" Thanks.

"

please send me operating manull

I have no video out on a epx2200

I swapped the main board with a working unit and it worked, so the issue lies on this main board ( the one with the input and output) . I have no service manual , if someone could help me find one ? this unit was working before shipment so should be repairable with the right info. thanks all

note : at this point I have only a vga monitor so could no try the bnc or s video out to see if those were ok. anyway i need to get the vga running 

Service Manual needed

Please E-mail to ultrasound@uol.com.br

we need halogen lamp of this device,and dont know properties of the lamp. thanks