GE HealthCare - LOGIQ S7
GE HealthCare LOGIQ S7 Forums
Add Ultrasound Systems to My Bench4 Results
Updated Jun 2 2022
2 RepliesTrying to load SW. Unable to set SATA 0 in boot device priority. Only gives SATA 1 and Disable as options. Any suggestions? RE: GE HealthCare - LOGIQ S7
Updated Dec 9 2019
Added Oct 21 2019
0 RepliesHI All,
I have a GE S7 ULTRASOUND machine has no video on the monitor. The GFS was changed. All the voltages were checked which are correct.The machine turns on and the touchscreen goes up but the monitor does not turn on. The cable monitor has 20 pins. Is there any way to measure the monitor voltage?Or Pin out diagram
RE: GE HealthCare - LOGIQ S7
Added Sep 10 2016
0 Replies
To work in the center of the probe diagnosing prostate diseases selected for Logic S7 ultrasound machine. I was offered different options. The budget is not limited. I can not determine between a Wideband biplane
microconvex probe or a Micro convex volume
probe 3/4 D.
I will not lose the diagnostic capabilities when purchasing Micro convex volume
probe
Best regards, dr. M.Kryshtopa
RE: GE HealthCare - LOGIQ S7