We upgraded our PC's operating system from WinXP to Windows 7. Need available CS2 Software for our Regius 190. Or do you recommend upgrading to CS7 as well? Need Software. Thank You
I was contacted by a user that has a KONICA MINOLTA REGIUS 190. She says "the study description that is sent to PACS is the first image description that was taken….They have had a field service engineer look at this several times with the PACS team and could not find a resolution….just causing lots of issues so needed to ask if anyone else had this issue or was it a setup issue." RE: Konica Minolta - Regius 190
Good day, please share a copy of service or installation manual of Regius model 190 and a service password if needed for printer configuration . my email aldrin_serrano.ph26@yahoo.com. thank you in advace RE: Konica Minolta - Regius 190
I had to replace the steel belt between the subscan unit and the counter-balance weight. The new belt is slipping, sometimes. I have greased the bearings on the subscan carriage and cleaned the steel belt with alcohol. I can move the unit freely by hand and there is no resistance anywhere. But, sometimes during initialization, the belt slips. The motor is still turning, but the subscan unit stalls before it reaches the HP sensor. Cleaning the belt with alcohol helps, but I have not been able to eliminate the problem. Any ideas how to fix this?
Thank you RE: Konica Minolta - Regius 190
