Philips M3001A MMS Module Forums

0 Replies

Good morning, I wonder if M3001A MMS module with serial number prefix DE907 is compatible with an IntelliVue MP70 monitor hardware revision B.00.18 and software revision M.03.03. Current compatibility matrix charts I've found don't list the M software revision which is the reason I'm asking here. Thanks, Jack

Equipment: Philips - M3001A MMS Module

RE: Philips - M3001A MMS Module

6 Replies

Good evening, I wonder if there is a compatibility list available for the Philips M3001A mms module. I have a IntelliVue MP30 monitor with hardware A.00.21 and software F.01.43 revisions and what version Of MMS I need to look for. Thanks in advance! Tom

RE: Philips - M3001A MMS Module

1 Reply

Here are some troubleshooting steps for when a nurse cannot get a heart rate readout from an ECG waveform, or the monitor continuously alarms for Asystole. 1) Choose the ECG numeric, then find Adjust Size in the pull down. When you do this it may be set to 2x, 3x, or 4x . Increasing size does not help the monitor to analyze the signal. The signal as it is analyzed by the monitor is always at X1. Set the size to X1. This will give you a better picture of what is actually happening . The signal is typically very small size; one the system cannot get a good reading off of. This issue is more likely seen with an e edematous patient or the thin leathery skin elderly type. It is difficult to get a good signal due to the type of skin. 3) Instruct the nurse do a mild dermabrasion. Attempt to clear the skin of oil or loose skin. 4) Ask the nurse to replace the patches. Ensure the patches are within their expiration date, and the package has not been opened for more than 24-48 hours. 5) If the signal is still weak, try switching to single lead analysis. This can be done from the central or bedside. Search through all of the available lead selections for one than has the best and strongest signal.

RE: Philips - M3001A MMS Module

1 Reply

Does anyone know of a company that repairs these modules in Canada? I usually send to BMESCO but I have been having issues with shipping them across border recently.

RE: Philips - M3001A MMS Module

2 Replies

Can any one please help with service manuals of the following Philips Monitor Modules.

M1002B

M1006B

M1006A

M3001A

M1008B

M1020A

M1020B

M1029A

RE: Philips - M3001A MMS Module

4 Replies

I have this MMS that is not be recognized by the monitor. I have been told that there is a fuse that if blown will cause this. Does anyone know about this?

 

Thanks,

RE: Philips - M3001A MMS Module