VWR - Clinical 200
VWR Clinical 200 Forums
Add Centrifuge to My Bench4 Results
Updated May 3 2021
2 RepliesI haven't used this centrifuge for quite a while. It is an older (2006) version of the VWR 200. I have set the speed to 5000 rpm, it has the 6-place 50 ml angle head rotor installed. The speed tops out at 665 rpm. What can I do to remedy this situation? Initially the LED screen was flashing "94" . I unplugged it and plugged it back in again, and the screen now functions normally.
RE: VWR - Clinical 200
Updated Apr 27 2021
6 RepliesI haven't used this centrifuge for quite a while. It is an older (2006) version of the VWR 200. I have set the speed to 5000 rpm, it has the 6-place 50 ml angle head rotor installed. The speed tops out at 665 rpm. What can I do to remedy this situation?
Initially the LED screen was flashing "94" . I unplugged it and plugged it back in again, and the screen now functions normally. RE: VWR - Clinical 200
1 ReplyWhat are the spec's for this device? All the manual says (which very little) is 6,000 RPM max RE: VWR - Clinical 200
Updated Jun 15 2016
1 Reply
Need services manual for VWR clinical 200.
Tks
erros 14,60,33 and cables loose inside equipment.
RE: VWR - Clinical 200