What do you call the wiring assembly encased in white flexible rubberized covering that regulates the up and down movement of bed? The covering has become brittle and is breaking off exposing wires that are located on each side of lower bed rails. Can they be replaced with new?
When connecting the bed to the communications port on the wall, the bed is constantly pining the nurse call function. I have replaced all the cables as well as the remote. Thoughts?
No inflate even after Scale reset, no errors. All other functions work
Flow chart seems to lead to mattress disconnect but would this give an error? Coupler seems fine, then flow chart says mattress, but again, would I not get some kind of error or is there something pertaining to this that may be loose and not throwing an error?
The height adjustment is not coming down. The Amber light that goes off when bed height is down is on. When I click on the up adjustment botten or the up adjustment footer, I hear a click sound but for the down, no click sound and no response for the bed to come down.
What could be the problem?
I have versacare p3200 bed thats been giving some issues. I had an issue with the bed stuck not going up or down and changed the hilo motor ended up it was just jammed pinched which caused the issue. Now the other day as we were lowering it down all the power went out. Sothis bed has now gotten 2 new batteries , changed to a brand new power control boaed, new step down transformer, new inline noise fiter, and a new capacitor. Still no power. I plug it in and it immediately blows the inline ceramic ac fuse thats in between the step down coil tranformer and the power control board. No light or sound just blows instantly. Fuse inline by the batteries is good doesnt blow. I see no frayed wires or loose connections anywhere. Is there something I am missing here.I get 120 at the end of the power cord where the wires tie into the block for the inline noise filter so I believe the power cord is good unless it has some built in circuit . Everything after the cord has been replaced new ??? Any ideas? RE: Hillrom - VersaCare P3200
The actual bed resembles an older Hill Rom Care Assist ES Med Surg Bed with 2 not 3 grab holds on the headboards.
I'm thinking of upgrading my wifes all electric Invacare. I'm after the better positioning and also an air mattress to better prevent bed sores. So I'm also asking about the P500 mattress. I'm a retired auto tech and haven't done much with ac. These beds seem as complicated as any electrical system on our modern cars. I believe the bed I'm thinking of is used and looked over by the seller who has been doing this for quite a while in Bloomington, Il. Not refurbished. Am I getting in way over my head? I really don't want to be fixing this all the time. Sorry, but I'm very new to these beds. Overall, are these as good as they say they are? Or, should I be looking at something else. She would like the added foot feature these better beds provide since she has a sensitive heel. RE: Hillrom - VersaCare P3200
