I can press all the buttons which are responsive, I can hear the motor working, the relevators actuating, the oil level is correct but there is no movement at all. Not elevating head, legs or bed.
The only movement it does, it's the leg extension.
Brand new bed put into service yesterday. On the railing next to the battery indicator is a wrench. Today it was lighted and kept alarming. Could not find it in the manuel. G
the bed had been stock for 4 months because i have to wait for the hydraulic reservoir that i have i ordered,before the problem is oil leakage,now theres no more leakage but only the head part is decreasing/increasing its height.i've air bleed it a lot of time but still same..could it be the valve or the hydraulic hose?i have check the voltage and resistance of the coil and its all good,same with the hydraulic hose.the chair position also not working.
the bed had been stock for 4 months because i have to wait for the hydraulic reservoir that i have i ordered,before the problem is oil leakage,now theres no more leakage but only the head part is decreasing/increasing its height.i've air bleed it a lot of time but still same..could it be the valve or the hydraulic hose?
The adjustment is not working but both the UCM are working. Only the high adjustment on the left is not working. Service required is not blinking. The cables are good and it is connected properly to the junction board. What seems to be the problem guys? I look forward for your help, thanks!
