Getinge - 400/500HC Series
Getinge 400/500HC Series Forums
Add Sterilizers/Autoclaves to My Bench49 Results
Updated May 11 2023
1 Reply
Hi all, I'm looking at buying a used Getinge 433LS and it looks to be in great shape but the pressure gauges show there is pressure when there is no pressure. We're unsure if that's a deal-breaker or something that can be fixed relatively easily. It was already removed from the facility but can be plugged in and turned on. Any insight would be greatly appreciated!
RE: Getinge - 400/500HC SeriesUpdated Jan 22 2023
2 RepliesHi all engineers here.
So i need some help from you . I have equipment getinge 500ch i would like to how to do calibration for it . Please explain to me how to do it
Equipment: Getinge - 400/500HC Series
RE: Getinge - 400/500HC SeriesUpdated Nov 24 2021
2 RepliesGood Day All, We have the Model 533HC and the machine is working fine. However, the printer is not printing the parameters when I run a cycle. I followed the trouble shooting guide on the service manual and the printer works when it is test print but like I said when I run the cycle it doesn't print parameters. Thank you in advance for any tips or advice. RE: Getinge - 400/500HC Series
Updated Oct 1 2021
9 RepliesHi everyone, still get know this machines. At this momenta I have a 533hc with the following problem, when I start a cycle (no mattwr gravity, flash or pre vac) after the purge o during the conditioning, the cycle is aborted, and display "Canc SW door" (actually the error is displayed in Spanish). The steam generator goes well, the control board detects the input and shows the output signals correct, but, the problem is that... anyone can give me a hand or clue to fix this problem? By the way I have the service manual for this models in pdf RE: Getinge - 400/500HC Series
Updated Jul 14 2021
5 RepliesHi everyone. I have a 433 HC with the following problem: when the steam boiler starts to filling, when reaches the hight probe stops, and the contactor is energized and start to heat up. At this point is normal, but, the problem starts a few minutes after, when suddenly the led FAULT in the control board of the boiler light up and turn off the contactor, then light off and the contactor is energized, and then the FAULT led is light up and cuttoff the contactor and the situation goes on and the steam is not produced. What do you think the problem is? Thanks in advance RE: Getinge - 400/500HC Series
Updated Jul 8 2021
1 ReplyHi everyone, can anyone provide me with Service Technical Manual part# 61301606091 for 433HC/533HC steam sterilizer RE: Getinge - 400/500HC Series
Added Feb 23 2021
0 RepliesHi everyone, can anyone provide me with a Service Manual for a 533HC steam sterilizer. RE: Getinge - 400/500HC Series
Added Nov 3 2020
0 RepliesDoes anyone have the 61301608205 Installation manual available? Am in need of it, preferably electronic version? RE: Getinge - 400/500HC Series
Updated Oct 21 2020
Updated Jun 29 2020