GE HealthCare - Logiq S8
GE HealthCare Logiq S8 Forums
Add Ultrasound Systems to My Bench14 Results
Updated May 28 2021
1 ReplyHello please i need help when I press reports msg show option not available any idea? RE: GE HealthCare - Logiq S8
Updated Feb 19 2021
1 ReplyHow do I setup volume measurement in order to do it both ways: start the measurement when pressing volume or take 3 calliper distances and press volume in the end?
The last one is not working for me.
THANKS. RE: GE HealthCare - Logiq S8
Updated Feb 15 2021
1 ReplyI have a logiq S8 that is having intermittent artifacts all over the scanning screen. Ran diagnostics for the noise flor and BF in low, med and high. Failed the noise test, channels 191 failed on low, med and high. I replaced the BF board(it wasn't cheap), a month later the issue comes back, it didn't fail the noise floor test but it did fail the same channels as before, plus channels 195 and 196 on the BF med test. Replaced the PID board and now we are seeing the same issue, has anyone seen this before? RE: GE HealthCare - Logiq S8
Updated Sep 6 2019
4 RepliesHi, i am trying to connect a pencil cw-probe that i bought to my s8. The slot is blocked. I already did a system update with the cw key but i cannot physically connect. I suspect the board is not able to receive cw and i have to buy a new piece of hardware, something like a port. Do i have to buy a new main board or do you know of the existance of such a connector port for CW?
Thank you in advance RE: GE HealthCare - Logiq S8
Updated Jun 5 2019
2 RepliesHello, does anyone have \WINDOWS\SYSTEM32\CONFIG\SYSTEM file or complete disk image?
Thanks! RE: GE HealthCare - Logiq S8
Updated Jan 15 2018
Updated Oct 24 2017
2 RepliesDoes anyone have a copy of the service manual for the Logiq S8? Thanks in advance. RE: GE HealthCare - Logiq S8
Updated Oct 24 2017
1 ReplyDoes anyone have a copy of the service manual for the Logiq S8? Thanks in advance. RE: GE HealthCare - Logiq S8
Updated Oct 24 2017
1 ReplyHello, I have a Logiq S8 that when we send images to our PACs the still images have the patient information displayed in banner at the top of the image. However the clips do not have the banner or any patient information displayed. Does anyone know where to configure to turn that on so we get the patient info on our clips. thanks RE: GE HealthCare - Logiq S8
Updated Oct 24 2017
3 RepliesDoes anyone have a copy of the service manual for the Logiq S8? Thanks in advance. RE: GE HealthCare - Logiq S8