Sat Oct 15 2011

current problem in compresser on /off problem

dear sir 

in my machine  ,one problem is found ,that is ,when the machine is on then produced 8-10 amp current, and when compresser on then current is 14-16 amp. but in next time compresser is on then current is 22-27 amp. that problem ,bcoz i used 15 kv generator ,that time compresser is off and machine produced error -62,plz give soluation of this problem.

thank u 


   RE: Centrifuge Report Post
Mon Oct 17 2011Reply from GaryBiomed
GaryBiomed

I don’t have this machine, but I would definitely say your compressor is bad.

I would contact Hettich

http://www.hettweb.com/contact-us.html

Toll Free: 1.866.370.4388
Phone: 978.232.3957
Email: info@hettweb.com

Here's the user manual

http://photos.medwrench.com/manuals/2086-2794.pdf

It says error 62 is Error / defective motor control.

Perform a MAINS RESET


Report Post

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details.
I Agree