service manual

Our sponsors may be able to help!

AUE

Conquest Imaging

Summit Imaging

Trisonics

Ultrasound Gurus

Our project team at Acuson benchmarked the HP5500 monitor design when we wrote the specification, making this an easy job. Be aware that the monitor is over 40 pounds in weight.

1 Unplug the system from the wall.
> Set the tilt/swivel such that the base of the monitor is horizontal. Lock it in place.
2 Remove monitor rear cover (2 screws - use short phillips screwdriver).
3 Unplug monitor AC power PI connector.
4 Disconnect 3 cables: J2 monitor softkeys, monitor video and monitor speakers (small standard screwdriver - 2 screws each).
5 Remove grounding strap.
6 Remove monitor mounting screws (2 screws).
7 Stand at the front of the system. Wrap arms around the monitor, grasp the lower back of the monitor firmly and pull towards you, and lift it off the system.