The motor rollers fail to stop spinning on power up of kodak poc 140 CR. Please what can be done to stop this from happening? Please help.
Tue Aug 21 2018
rollers fail to stop spinning on power up of kodak poc 140
Sun Aug 26 2018Reply from ceshop
use the diagnostic and see which sensor has failed. if you do not have access to the diagnostics open the cover and see which sensor is active
J500 connector connects to J208 on motion card.
J50l connects to sensor 4 on the drum.
J502 connects to sensor 5 on the drum.
J505 connects to sensor 1 on the drum.
J506 c nnects to sensor 2 on the drum.
J507 connects to sensor 3 on the drum.
J508 connects to loader sensor in back position.
J509 connects to roller sensor.
J5lI connects to W0 sensor.
J513 connects to cassette presence sensor,
J514 connects to cassette lock sensor.
J515 connects to right limit sensor.
J5l6 connects to left limit sensor.
Report Post