I have an ATS 1200 that is getting an alarm with a message "Line Occlusion" on the second side only. The main side works with no alarms. Switching the hose from the working Main side to the Second side the unit alarms. The alarm occurs at various times, sometime 30-40 second, sometimes 1 minute or so. There are no kinks in the hose.
Wed Oct 03 2018
Second Side "Line Occlusion" alarm
Sun Oct 07 2018Reply from Boogala
Hi Mate,
I would try conducting a calibration first. If not it would probably be a faulty pressure transducer on the main board
Report Post
