Error Code

The DFV0008 error code is related the amount of disinfectant measured during the disinfection cycle. If the amount if disinfectant is inadequate for a high level disinfection, this error will occur. The first step is to re-run the cycle, following the procedures detailed in the user manual. For more assistance, please contact Nanosonics at 844-876-7466, opt 1.

This is a error because you mist value need calibration

Hi GGB & Jritt,

The DFV0008 error is usually associated to amount of disinfectant provided for the high level disinfection and is not normally a measurement or calibration issue. For more assistance, please contact Nanosonics at 844-876-7466, opt 1.