Hi everybody,
I have a new Hard drive and MO drive with the latest software but as you can see, when I try to load the software from the MO Drive to the new hard drive,, the error below appears. FYI I also have to use Hyper terminal to access the system.
Please help.
Error: Device not ready[reset]
MO Disk is not ready
System error: MO Disk is not ready
Please call Service. 1-800-888-7436
NMI i
RAM found: 128MB (bank0: 64MB bank1: 64MB SIMMid: 0xad)
Found total of 128 Meg memory
Loading firmware ...
SSP Firmware (Boot Monitor Module)
Version: 2.32 [Built Apr 29 2008, 16:01:23]
Copyright (c) Siemens Medical Solutions 1996-2008.
Video Mode: NTSC
FPP version - sw: 0x44, hw: 0x0
Starting Power Up Tests...
SSP PUT Loader Version 2.0, Built Jun 1 2005, 20:30:13.
start_addr 0x1000 length 0x2f000
PUT Version 8.0
BIN_TARGET (s9.51_rel) built by -- Fri Oct 28 00:27:44 PDT 2005
1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.
21.22.23.24.
25.26.27.28.29.30.
PUT: Passed
RDP7(128M) PIC2 IOV2 BDM2(64M) MX3-GI PVI2[03]
PVI_FPGA-10033522 VSC_FPGA-02282006 FPD
Waiting for HD drive to be ready.
No file system
Could not find the file system
File /lynx.os.ssp not found at HD disk at partition 1
Waiting for HD drive to be ready
Could not find the file system
File /lynx.os.ssp not found at HD disk at partition 6
Waiting for MO drive to be ready..................
Mon Oct 22 2018
Acuson Sequoia S512
Tue Oct 23 2018Reply from hmsawa