Thu Sep 03 2020
error 000
Thu Sep 03 2020Reply from seneque5
Thu Sep 03 2020Reply from Stylianos Gaitanakis
Thu Sep 03 2020Reply from T-Lobato
There is a service manual attached to this device, under documents. I did not see Error 035 though.
T.
TJ Lobato | MedWrench Guru
Report Post
Thu Sep 03 2020Reply from seneque5
I lost many of my services manuals
If you have a list of errors or service manual send me to show how to resolve the problem
Abdelmajid Bougrine
Report Post
Mon Sep 07 2020Reply from seneque5
Sat Sep 19 2020Reply from rami1111
Sun Sep 20 2020Reply from seneque5
E000. Black out/ Fuse
E035. No fill
See hydrolic circuit between distilled water reservoir and chamber
Abdelmajid Bougrine
Report Post
Tue Sep 22 2020Reply from rami1111
now i get H402 at the start of the process phase the temperature reaches 137 ° what can i do
Report Post
Wed Sep 23 2020Reply from seneque5
You must check the hydrolic circuit between distilled water reservoir
The presser exceed 135 because there's no water in the chamber
Abdelmajid Bougrine
Report Post