need to know how to calibrate touchscreen after replacement, at least how to enter service mode
Wed Nov 10 2021
replacement of touchscreen
Wed Nov 10 2021Reply from Chris S
1 Go to Main Setup -> Operating Modes -> Service Mode (1345)
2 Select Main Setup
3 Select Hardware
4 Select Touch Calibration
Official MedWrench Guru
Report Post
Wed Nov 10 2021Reply from Ray Brown, CBET
IF you can get the screen to cooperate enough to follow all those touches. You may have to be creative. But if that doesn't work, then you'll have to use the Philips Service Tool.. service software in a PC or laptop, to get to the touchscreen setup.
Report Post
